HSM SP 5080 0.07"x0.59" 3x400V Shredder Baler
Basic Specs of the HSM SP 5080 Shredder Baler
- Shred Size: 0.07" x 0.59"
- Throat Width: 19.7"
- Capacity: Up to 130 sheets *
- Speed: 8.27" per second
- Power: 400V/50Hz/11500W
- Pressing Power:80kN
- Shipping Wt: 3263 lbs
- Dimensions: 71" H x 46" W x 94.5" D
- Bale Dimensions: 31.5"L x 22.5"W x 19.3"H
Features of the HSM SP 5080 Shredder Baler
- Material intake via large loading table and electric conveyor belt
- Multi-functional operating and display element for continuous and reverse operation
- Automatic reverse
- Modern PLC press control unit with multi-language display and menu navigation
- Automatic photoelectric control of the pressing process
- Integrated, automatic oiler for the cutting unit
- Material compressed directly in the waste bag (standard equipment: 5 plastic bags)
- Display to indicate operating status and "œbale ready"
- Integrated emergency-stop rail on the table
The HSM SP 5080 shredder baler combination unit offers a high performance electric conveyor, modern press control unit, and integrated automatic oiler for the guaranteed efficient data destruction.
Video Demo of the HSM SP 5080 0.07"x0.59" 3x400V Shredder Baler
Description of the HSM SP 5080 0.07"x0.59" 3x400V Shredder Baler
For quality and user-friendly technology, the HSM 5080 shredder baler could be the perfect solution. Shredding at a rate of over 500 lbs per hour, the HSM 5080 breaks down your materials to produce 0.07" x 0.59" particles. Destroy anything from reams of paper, to three-ring binders, to even cardboard. The HSM 5080 shredder baler is insensitive to smaller metal parts, and will easily shred chip cards, CDs, disks and other similar materials. Your bulk materials can be diminished to security level 4 standards in a matter of minutes. Instead of hand feeding your documents piece by piece into the generous throat opening, the spacious loading table and electric conveyor belt assume that responsibility. Place your items onto the loading table and the high performance electric conveyor grabs these materials, pulling them into the shredder for destruction. A convenient multi-functional operating and display system allows for continuous and reverse operation. Too much paper causing a jam? The HSM 5080 immediately reacts, switching into reverse mode to remedy the problem. After the jam is cleared, your machine resumes operation.
Shreds are detected by the automatic photoelectric control, which triggers the pressing process. This modern PLC press control unit offers a convenient menu navigation and multi-language display. Your shredded material is compressed into 31 ½" L x 22 ½" W x 19 ¼" H bales. In turn, these bales are evacuated into plastic waste bags, perfectly organized for recycling. For maximum efficiency, the shredding and pressing processes occur concurrently. Feel free to work on other tasks while the shredder baler runs. A practical display indicates to the user operating status and when your bale is ready. Any packed warehouse or recycling center can house this space-saving machine. Weighing over an incredible 3262 lbs, this powerhouse shredder baler comes with handy mobility casters for easier movement throughout your production area.
* Please note, capacity varies with grain, size, quality & paper weight and sufficient power supply.
** Please use actual HP as a specification for determining value. Use of Peak HP is for comparison purposes only where other than Actual HP is used.
| Manufacturer Name | HSM |
|---|---|
| Throat Size/Feed Opening | 19 11/16" |
| Shred Speed | 8.27 inches/s |
| Shred Size | 0.075" |
| Security Level | 4/P-5 |
| Cut Type | Cross Cut |
| Sheet Capacity | Up to 130 sheets |
| NSA Evaluated | N/A |
| Shreds Credit Cards? | Yes |
| Shreds Paper Clips? | Yes |
| Shreds Staples? | Yes |
| Peak HP | 11500 W |
| Disclosures | Capacity varies with grain, size, quality & paper weight and sufficient power supply. ** Please use actual HP as a specification for determining value. Use of Peak HP is for comparison purposes only where other than Actual HP is used. |
| Continuous Motor | Yes |
| Model # | 5080 |
| Weight | 3263 lbs |
| Height | 71" |
| Width | 46" |
| Depth | 95" |
| Voltage | Power: 400V, 3 Ph |
| Warranty | |
| Shipping Weight | 2976.0000 |
| Search Terms | hsmsp, hsm5080, sp5080, hsmsp5080, shredderbaler, hsmbaler |
