Wexler US-2000LD 50mm Loop Bander

Description of the Wexler US-2000LD 50mm Banding Machines

Does your production process finish up with some sort of strapping or banding application? If so, you already know that these machines can be very frustrating and costly. They can generate a lot of noise, odor from burning materials, and even consume a lot of energy while in use. Fortunately, the Wexler US2000 50mm Loop Bander is available. Capable of performing more than 35 strapping procedures every minute, the Wexler US2000 50mm Loop Bander relies on ultrasonic technologies to perform cold welding functions. These can be adjusted to permanent welds or to simple and light "peelable" welds per the needs of the materials. The tension on the 50mm strapping can be adjusted as well, and the conditions of the materials are always a priority. The Wexler US2000 50mm Loop Bander has an adjustable opening of up to 13"x10", but this can be altered to suit the needs of the manufacturer and guarantees that flexibility is maintained. The overall design of the Wexler US2000 50mm Loop Bander means that a lot of the traditional maintenance issues and problems that tend to occur with other banding units will not happen here. There cannot be any glue residue or build up because glue is not used. Debris will not be dropped inside of the housing of the machine since debris is not created by this heat free process. There are no risks of burns or copious energy consumption thanks to the heated elements in the system, and the use of cold welding means that this is a very efficient system. The 50mm bands can be made from a wide array of materials as well with everything from paper and plastic to pre-printed strapping being workable in this unit. The system is incredibly easy to use, and an operator would need very little training before they begin using the system efficiently and rapidly.